Kuitu-lähetin-vastaanotin BlueOptics ASG0000SR 10000 Mbit/s SFP+ 850 nm

The BlueOptics ASG0000SR 10000 Mbit/s SFP+ 850 nm is a fiber optic transceiver module designed for short-reach high-speed data links. It supports a maximum data transfer rate of 10 Gbit/s over multimode fiber using an 850 nm VCSEL light source. The module conforms to the SFP+ form factor for compact installation in switches, routers and network interface cards that accept SFP+ modules, providing a standard physical interface for 10G short-reach connectivity.

Advantages

This transceiver offers compact SFP+ sizing with support for 10 Gbit/s links, enabling high-density port deployments. Operating at 850 nm, it is suitable for multimode fiber systems and typical short-distance campus or data center interconnects. The BlueOptics ASG0000SR is engineered for interoperability with standard SFP+ slots and provides reliable optical transmission for established short-reach applications.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP+ transceiver into a compatible SFP+ slot on a switch, router or network interface card, ensuring the module is fully seated. Connect appropriate multimode fiber patch cords to the transceiver's optical ports, observing correct connector types and polarity. Verify link status through the host device management interface and configure the port speed and duplex settings as required by the network. Handle the module using standard ESD precautions and keep dust caps on when the transceiver is not in use.

Recommendations

For reliable performance, use OM3/OM4 multimode fiber for 10 Gbit/s links at 850 nm and maintain clean connectors to minimise insertion loss. Match the transceiver to devices that support SFP+ modules and confirm compatibility with the host vendor if vendor lock-in or specific firmware is a concern.