Kuitulähetin-vastaanotinmoduuli BlueOptics LFP416-BO SFP 100m alumiini

The BlueOptics LFP416-BO SFP 100m Aluminium is a compact fiber optic transceiver module designed for Ethernet networks requiring flexible media conversion and short-range connectivity. Housed in an aluminium casing and weighing 20 grams, this SFP module supports 10/100/1000BASE-T operation over twisted-pair copper cabling and offers reliable data transmission up to 100 metres. The module follows MSA standards for form factor and electrical interface, making it suitable for integration into SFP-capable switches, routers and other networking devices that accept standard SFP copper transceivers.

Advantages

The module provides a small, lightweight aluminium enclosure that aids heat dissipation and mechanical durability while keeping the footprint minimal. It supports triple-speed Ethernet (10/100/1000 Mbps) via an RJ45 interface, enabling automatic negotiation and compatibility with common network equipment. Designed and tested for cross-vendor compatibility and manufactured to MSA specifications, the transceiver aims for stable operation and extended service life in standard network environments.

Suitable for

• Short-range Ethernet connections up to 100 m over Cat5e/Cat6 twisted-pair cabling
• Media conversion in SFP-enabled switches and routers
• Replacement or upgrade of copper SFP ports in network equipment
• Edge deployments, server uplinks and small office networks

Key specifications

• Form factor: SFP (Small Form-factor Pluggable)
• Data rates supported: 10/100/1000 Mbps (auto-negotiation)
• Maximum cable distance: up to 100 metres over twisted-pair copper
• Connector type: RJ45 electrical interface
• Housing material and colour: aluminium
• Weight: approximately 0.02 kg
• MSA-compliant electrical and mechanical specifications

How to use

Insert the BlueOptics LFP416-BO into any SFP slot designed to accept copper SFP modules, taking care to align the module with the host device's guide rails. Connect a suitable twisted-pair Ethernet cable (Cat5e or better) to the module's RJ45 port and to the remote endpoint. The device and the link partner will typically negotiate the correct speed and duplex automatically. Monitor link/activity LEDs on the host device to confirm successful link establishment and verify network parameters via the host system if required.

Recommendations

Use quality Cat5e or Cat6 cables and maintain cable runs within the specified 100 m limit for reliable performance. Ensure the host device supports third-party or compatible SFP transceivers and apply any vendor-specific firmware settings if necessary to guarantee full functionality.