Kuitulähetin-vastaanotinmoduuli BlueOptics PN54023K-BO 1250 Mbit/s LC

The BlueOptics PN54023K-BO is an SFP fiber optic transceiver module designed for single-mode links with an LC duplex interface and a maximum data transfer rate of 1250 Mbit/s. Housed in a compact silver enclosure and weighing approximately 20 g, this module follows MSA-compatible SFP form factors to provide optical connectivity for switches, routers and other networking devices that accept standard SFP transceivers.

Advantages

This transceiver supports 1000BASE-LX class optical signalling and is engineered for stable single-mode fiber transmission with separate transmit and receive channels. The LC interface enables duplex connections in a small form factor, while the compact silver module is easy to install and replace. The design is compatible with standard SFP ports and is intended to provide reliable optical performance for up to typical single-mode distances when used in appropriate network environments.

Suitable for

Key specifications

How to use

Insert the BlueOptics PN54023K-BO transceiver into an available SFP port on your network device, ensuring proper orientation and seating until it latches. Connect LC duplex single-mode fiber patch cords to the transmit and receive ports, observing correct polarity. Once connected, verify link status on the host device and configure the port as required by your network settings and hardware. If the host supports digital diagnostic monitoring (DDM/DOM), enable or check that function to monitor operating parameters such as optical power and temperature when needed.

Recommendations

Use certified single-mode LC duplex patch cords and maintain correct fiber polarity to achieve optimal link performance. Confirm that the target device supports 1000BASE-LX SFP modules and, if remote monitoring is required, ensure the host hardware supports DDM/DOM for real-time diagnostics. Handle the transceiver by the housing to avoid contamination of the optical interfaces and keep protective caps on fiber connectors when not in use.