Kupari SFP+ lähetin-vastaanotin BlueOptics AA1403043-E6-BO 10000 Mbit/s

The BlueOptics Copper SFP+ Transceiver AA1403043-E6-BO is a compact 10G SFP+ module designed for copper-based 10GBASE-T connections. Housed in a durable metal casing and weighing approximately 20 g, this transceiver supports a maximum data transfer rate of 10000 Mbit/s and is intended for use in systems that accept SFP+ copper modules. Its construction and MTBF of 1,000,000 hours emphasize reliability and suitability for continuous network operation.

Advantages

This BlueOptics SFP+ transceiver offers a standardized SFP+ interface in a silver metal enclosure that simplifies hot-pluggable installation and replacement. The module's lightweight design and industry-standard form factor make it easy to integrate into switches, routers and other compatible networking equipment. With a high MTBF figure, the transceiver is engineered for long-term operation and reduced maintenance cycles.

Suitable for

• 10G copper uplinks between switches and routers
• High-speed server connections in data centers
• Aggregation ports and access layer links
• Replacement or spare module inventories for SFP+ compatible hardware

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Housing: metal, silver colour
• Weight: 0.02 kg (approx. 20 g)
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the transceiver into an available SFP+ port on compatible network equipment according to the device manufacturer's hot-plug procedure. Ensure the host hardware supports copper SFP+ 10GBASE-T modules and that the network interface settings match the intended link speed and duplex mode. After insertion, verify link LEDs and system management interfaces to confirm the module is detected and operating at the expected data rate.

Recommendations

For stable 10G copper links, use appropriate Cat6a or higher cabling and keep cable lengths within the supported distances for 10GBASE-T copper connections. Confirm host device compatibility and software/firmware support for third-party SFP+ modules before deployment. Store spare modules in a dry, static-free environment when not in use.