Langaton silta Silex BR-500AC E1600 802.11ac Dual Band

The Silex BR-500AC E1600 is a compact wireless bridge that connects wired devices to an existing Wi‑Fi network using 802.11ac dual‑band wireless. It allows network extension and integration of equipment without changing cabling, enabling flexible placement of printers, scanners, POS terminals and industrial devices while maintaining network connectivity.

Advantages

The BR-500AC supports 802.1x authentication and WPA2/WPA3 security modes, providing compatibility with modern secure networks. Dual‑band 802.11ac operation offers improved throughput and reduced interference compared with legacy standards. Its bridge functionality simplifies connecting Ethernet-only devices to wireless infrastructure without modifying the devices themselves.

Suitable for

• Connecting network printers and scanners to Wi‑Fi
• Linking POS terminals and payment devices
• Integrating industrial or legacy Ethernet equipment into wireless networks
• Extending network reach where running cables is impractical

Key specifications

• Model: Silex BR-500AC E1600
• Wireless standard: IEEE 802.11ac (dual band)
• Security: 802.1x authentication; WPA2 and WPA3 supported
• Purpose: Ethernet-to-Wi‑Fi bridge for wired devices
• Brand: Silex
• EAN: 4944406005961

How to use

Connect the BR-500AC to the Ethernet port of the device you want to add to the wireless network, power the bridge, and use the device’s or the bridge’s setup interface to select the target Wi‑Fi network and enter credentials. Configure authentication settings (802.1x) and select WPA2 or WPA3 as required by the network. After connecting, the bridged device will appear on the local network as if it were wired.

Recommendations

Place the bridge within good signal range of the access point and avoid physical obstructions for stable performance. Use WPA3 where available for stronger security and verify 802.1x settings with your network administrator when connecting to enterprise networks.