Seinäasennuskaappi LOGON RWM16U56BL 16U musta avainlukko kaapelinhallinta

The LOGON RWM16U56BL is a wall mounted rack with a 16U capacity, a key lock for security, and integrated cable management. It features a black finish, extruded aluminum frame and a tempered 4 mm antistatic glass door with smoothed edges. Colored strips at the sides of the door provide a decorative appearance. The cabinet includes one set of device installation rails (two rails mounted) that allow depth adjustment of installed equipment, and cable inlet holes (145 x 70 mm) at the top, bottom and rear for three-direction cable entry.

Advantages

The fixed side doors and front-access design for wall mounting provide a compact, secure installation with access only from the front. In free-standing applications the rack can be accessed from both front and rear. Ventilation holes at the top chassis support passive airflow; attaching an optional ventilation module with up to two fans enables active ventilation. A rubber-edged, movable cable entry module (0–50 mm travel) with a sliding compression system safely compresses incoming cables and reduces dust ingress. Optional pinion feet or caster group can be used for free-standing configurations.

Suitable for (tasks / use cases)

• Wall-mounted network equipment and small server installations
• Patch panels, switches and low-density rack devices
• Environments requiring compact, secured cable-managed racks

Key specifications

• Rack capacity: 16U
• Height: 823 mm
• Depth: 560 mm
• Width: 600 mm
• Product colour: Black
• Front door: 4 mm tempered antistatic smoothed glass with extruded aluminum frame
• Cable inlet holes: 145 x 70 mm (top, bottom, rear)
• Device installation rails: 1 set (2 rails) mounted, depth-adjustable

How to use

Mount the rack to a load-bearing wall following local building and safety codes, ensuring the mounting surface and fixings support the cabinet weight plus installed equipment. For wall mounting, access equipment from the front only; for free-standing use install optional pinion feet or casters and use the rear and front access. Route cables through the 145 x 70 mm inlet holes at top, bottom or rear. If increased airflow is required, attach the optional fan module (up to two fans) to the top ventilation hole to enable active ventilation; otherwise rely on passive ventilation through the top chassis holes.

Recommendations

Ensure correct earthing/grounding of the rack and connected equipment. Plan cable routes and secure heavy devices on the lower U positions. Use compatible mounting hardware and verify that total equipment weight does not exceed wall or free-standing support limits. Clean the glass door with non-abrasive, antistatic cleaner and avoid excessive force on the rubber cable entry module.