Seinäasennusteline LOGON RWM16U45BL 16U musta avainlukko kaapelinhallinta

The LOGON RWM16U45BL is a 16U wall-mounted rack with a black finish, designed for secure housing and organized installation of network devices. It features a 4 mm tempered, antistatic glass front door with smoothed edges, colored side strips and an extruded aluminium frame that provides high fracture resistance. The cabinet includes a key lock and integrated cable management to support tidy installations in home or office environments.

Advantages

The cabinet offers both passive and optional active ventilation: ventilation holes in the upper chassis enable natural airflow, and an optional ventilation module with up to two fans can be installed for active cooling. Fixed side doors ensure a compact wall-mounted footprint while front access allows safe device handling; in free-standing configurations front and rear access is possible. Device installation rails are pre-mounted to allow depth adjustment of equipment, and multiple 145 x 70 mm cable inlet openings at the top, bottom and rear simplify cable routing. A rubber-edged cable entry module with 0–50 mm movement and sliding compression reduces dust ingress and secures incoming cables.

Suitable for

• Wall-mounted installations of network switches, patch panels and small servers
• Environments requiring secure access with a key lock
• Office or home network closets where tidy cable management is needed
• Setups that may later require optional active ventilation (up to 2 fans)

Key specifications

• Rack capacity: 16U
• Width: 600 mm
• Height: 823 mm
• Depth: 450 mm
• Front door: 4 mm tempered antistatic glass with extruded aluminium frame
• Colour: Black
• Locking: Key lock
• Cable inlets: 145 x 70 mm at top, bottom and rear
• Cable entry module: rubber-edged, movable 0–50 mm with sliding compression

How to use

Mount the rack securely to a suitable wall structure following local mounting guidelines and the manufacturer’s mounting points. Install devices on the pre-mounted installation rails and adjust their depth as required. Route cables through the 145 x 70 mm inlets and use the rubber-edged cable entry module to compress and seal incoming cables. If additional cooling is required, attach the optional ventilation module with up to two fans to the upper chassis ventilation opening.

Recommendations

For reliable operation, ensure the rack is mounted to a load-bearing wall or suitable support, maintain adequate clearance for airflow at the front and rear, and seal cable entries to minimise dust. If installing power-dense equipment, consider adding the optional fan module to improve heat dissipation.