Microconnect B-FTP60025PI verkkokaapeli pinkki 0,25 m Cat6 F/UTP (FTP)

The MicroConnect B-FTP60025PI RJ-45 Cat6 0.25 m Pink is a 0.25 m F/UTP-shielded Cat6 patch cable with RJ-45 connectors. It is designed for connecting network devices such as switches, modems and routers to each other or to structured cabling via patch panels, keystone jacks or wall outlets. The cable is tested to the Cat6 standard (up to 250 MHz) and is backwards compatible with Cat5e and Cat5 systems.

Advantages

Shielding (F/UTP) reduces electromagnetic interference (EMI) and helps prevent crosstalk, preserving signal integrity and reducing transmission errors. The cable supports high data rates up to 10000 Mbit/s when used within appropriate network equipment. Built-in latch protection on the RJ-45 plugs protects the connector tab during installation in tight spaces. The 0.25 m length and pink colour make the cable suitable for short patch connections and easy visual identification in small office or home network setups.

Suitable for

• Short patch connections between switch, router and modem
• Connecting devices to patch panels, keystone jacks or wall outlets
• Home and small office network and entertainment setups
• Environments where reduced EMI is required

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: F/UTP (foil shielded twisted pairs with overall drain/braid)
• Connectors: RJ-45 to RJ-45 with latch protection
• Length: 0.25 m
• Data rate: up to 10000 Mbit/s (dependent on network equipment)
• Colour: Pink
• MPN: B-FTP60025PI
• EAN: 5711783247708

How to use

Plug one RJ-45 connector into the network device (switch, router or modem) and the other into the target device, patch panel or wall outlet. Ensure connectors are fully inserted until the latch clicks to establish a secure connection. Use the 0.25 m cable for short-distance patching inside racks, between adjacent devices or for neatly routed desktop connections.

Recommendations

For best performance, avoid sharp bends and excessive twisting of the cable and keep it away from strong sources of electromagnetic noise where possible. Verify that network equipment supports the intended data rates and that connections are properly seated to ensure reliable operation.