Microconnect B-FTP620 verkkokaapeli harmaa 20 m Cat6 F/UTP (FTP)

The Microconnect B-FTP620 is a 20 m Cat6 networking cable with RJ-45 connectors designed for reliable wired connections between devices such as switches, modems, routers, patch panels, keystone jacks and wall outlets. The cable meets Cat6 standard testing up to 250 MHz and is backwards compatible with Cat5e and Cat5. It features F/UTP (B-FTP) shielding to reduce electromagnetic interference and supports high data transfer rates up to 10000 Mbit/s. The grey jacket and latch protection on the connectors make it suitable for installations with limited space.

Advantages

The F/UTP shielding provides improved protection against EMI, reducing crosstalk and maintaining signal integrity for stable data transmission. Cat6 construction and 250 MHz testing ensure compatibility with higher bandwidth applications while still supporting older Cat5e/Cat5 devices. Built-in latch protection helps prevent connector damage during tight installations, and the 20 m length offers flexibility for small office, home and structured cabling setups.

Suitable for

• Wired connections between switches, routers and modems
• Patch panels, keystone jacks and wall outlet terminations
• Small office and home network installations
• High-bandwidth applications requiring reduced EMI and crosstalk

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: F/UTP (foil shielded, overall)
• Connectors: RJ-45 to RJ-45 with latch protection
• Length: 20 m
• Data rate: up to 10000 Mbit/s
• Colour: Grey
• Weight: 0.408 kg
• Brand/MPN: MicroConnect / B-FTP620

How to use

Connect one RJ-45 connector to your network device (switch, router or modem) and the other to the receiving device or infrastructure point such as a patch panel, keystone jack or wall outlet. Ensure connectors are fully inserted until the latch clicks to establish a secure connection. Route the cable without sharp bends and avoid running parallel to high-power electrical lines to minimise interference. For permanent installations, secure the cable along trunking or cable ties at appropriate intervals without compressing the jacket.

Recommendations

For best performance, use the Microconnect B-FTP620 in environments where reduced electromagnetic interference is required and keep cable runs within recommended lengths for your network equipment. When terminating into panels or keystone jacks, follow standard wiring schemes (T568A/T568B) and test connections with a network tester after installation.