Microconnect B-UTP5075W verkkokaapeli valkoinen 7,5 m Cat5e U/UTP (UTP)

The Microconnect B-UTP5075W is a 7.5 m Cat5e networking cable with U/UTP (unshielded twisted pair) construction and RJ-45 connectors on both ends. Tested to the Cat5e standard up to 100 MHz, the cable supports typical Ethernet applications and is backwards compatible with Cat5. The white jacket provides a neutral appearance suitable for home or office installations, and the product includes latch protection to reduce risk of connector damage during tight installations.

Advantages

This Cat5e cable is manufactured to meet Cat5e performance up to 100 MHz and is backwards compatible with Cat5 equipment. The cable uses U/UTP pairing for reliable signal transmission in most small office and home environments. RJ-45 connectors on both ends and integrated latch protection improve durability during installation and everyday use. At 7.5 m length the cable offers flexible placement between devices such as switches, modems, routers and patch panels.

Suitable for

• Connecting routers, modems and switches
• Patch panel and keystone jack connections
• Home network and entertainment setups
• Small office local area networks (LAN)

Key specifications

• Standard: Cat5e (tested up to 100 MHz)
• Length: 7.5 m
• Connectors: RJ-45 — both ends
• Shielding: U/UTP (unshielded twisted pair)
• Colour: White
• Data rate (typical): up to 1000 Mbit/s (depends on network equipment)
• Weight: 0.13 kg

How to use

Insert the RJ-45 connector into the network port of your device (router, switch, modem or wall outlet) until the latch clicks. Use the cable to connect devices directly or via network infrastructure such as patch panels or keystone jacks. Route the cable to avoid tight bends and excessive strain; the integrated latch protection helps prevent connector damage when installing through confined spaces.

Recommendations

For best performance, keep cable runs within recommended lengths for Ethernet standards, avoid running parallel to high-voltage power lines, and verify network equipment supports the desired data rates. Replace the cable if the jacket or connectors show visible damage.