Microconnect B-UTP603Y verkkokaapeli keltainen 3 m Cat6 U/UTP (UTP)

The Microconnect B-UTP603Y is a 3 m Cat6 networking cable with RJ-45 connectors designed for connecting network devices such as switches, modems and routers or terminating into patch panels, keystone jacks and wall outlets. It supports Cat6 performance up to 250 MHz and data rates up to 10 000 Mbit/s, uses U/UTP construction and comes in a yellow jacket for easy identification. The cable includes latch protection to reduce the risk of connector damage during tight installations.

Advantages

This Cat6 cable is backwards compatible with Cat5e and Cat5 standards, tested to Cat6 frequencies (250 MHz) and rated for gigabit and higher network applications. The U/UTP design provides reliable signal performance for small office, home and entertainment networks, while the bright yellow jacket improves visibility in cable bundles. Latch protection on the RJ-45 plugs helps prevent accidental damage during routing and installation.

Suitable for

• Connecting switches, routers and modems
• Patch panel and keystone jack terminations
• Small office and home network setups
• Home entertainment and media streaming devices

Key specifications

• Length: 3 m
• Standard: Cat6, tested up to 250 MHz
• Connectors: RJ-45 to RJ-45 with latch protection
• Cabling technology: 10/100/1000Base-T(X)
• Maximum data rate (manufacturer): up to 10 000 Mbit/s
• Shielding: U/UTP
• Colour: Yellow
• Weight: 0.08 kg

How to use

Plug one RJ-45 connector into your network device (switch, router or modem) and the other connector into the destination device or wall outlet/patch panel. Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid tight compression or pinching to maintain signal integrity. For wall- or panel-mounted installations, feed the cable through the appropriate keystone jack or patch panel port and secure the connections according to your installation hardware instructions.

Recommendations

Use this Cat6 cable for in-room and short-run connections up to 3 m. For structured cabling across longer distances or outdoor runs, select appropriately rated cables and follow local cabling standards for shielding and grounding.