Microconnect SSTP610Y verkkokaapeli keltainen 10 m Cat6 S/FTP (S-STP)

The MicroConnect SSTP610Y is a 10 m Cat6 S/FTP networking cable designed for reliable wired connections between devices such as switches, modems, routers, patch panels and wall outlets. The cable meets Cat6 performance up to 250 MHz and supports data rates up to 10000 Mbit/s. Its yellow jacket improves visibility in installations and the S/FTP (S-STP) shielding reduces electromagnetic interference to maintain signal integrity in home and office networks.

Advantages

The S/FTP construction provides strong protection against EMI and crosstalk, helping to reduce transmission errors and preserve data speed. Latch protection on the RJ45 connector prevents damage during installation in tight spaces. Backwards compatibility with Cat5e and Cat5 allows use with existing network equipment without loss of connectivity. The 10 m length offers flexibility for typical small office and home setups.

Suitable for

• Connecting computers, switches and routers to a patch panel or wall outlet
• Home and small office wired Ethernet installations
• Entertainment systems and media devices requiring stable wired connections
• Environments where reduced electromagnetic interference is important

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: S/FTP (overall braid + individually shielded pairs)
• Length: 10 m
• Maximum data rate: up to 10000 Mbit/s
• Colour: Yellow
• Connector: RJ45 with latch protection

How to use

Connect one end of the MicroConnect SSTP610Y cable to an Ethernet port on a device (for example a router or switch) and the other end to the destination port such as a patch panel, keystone jack or wall socket. Ensure connectors are fully inserted until the latch clicks to secure the connection. Route the cable to avoid sharp bends and keep it separated from strong electrical sources where possible to maintain optimal signal quality.

Recommendations

For best performance, install the cable away from high-voltage power lines and maintain bend radius recommendations. Use the shielded cable where electromagnetic interference or crosstalk may affect other unshielded runs. Verify compatibility with existing network hardware (Cat5/Cat5e/Cat6) and test connections after installation.