Microconnect STP607R verkkokaapeli punainen 7 m Cat6 F/UTP (FTP)

The MicroConnect STP607R is a 7 m Cat6 networking cable with RJ-45 connectors and F/UTP shielding, designed for reliable wired connections between network devices such as switches, modems, routers or to structured infrastructure via patch panels, keystone jacks or wall outlets. It supports Cat6 performance up to 250 MHz and is backwards compatible with Cat5e and Cat5 standards. The cable is red and weighs approximately 0.168 kg.

Advantages

Shielding (F/UTP) reduces electromagnetic interference (EMI) and helps prevent crosstalk, improving signal integrity and reducing transmission errors. The cable meets Cat6 frequency requirements up to 250 MHz and is compatible with lower-category cabling. RJ-45 connectors include latch protection to reduce the risk of connector damage during installation in confined spaces.

Suitable for

• Wired connections between routers, modems and network switches
• Patch panel and keystone jack terminations
• Home and small office networks
• Entertainment systems and media streaming setups

Key specifications

• Standard: Cat6 (up to 250 MHz)
• Shielding: F/UTP (shielded twisted pair)
• Length: 7 m
• Connectors: RJ-45 to RJ-45
• Maximum data rate (manufacturer): up to 10000 Mbit/s
• Colour: Red
• Weight: 0.168 kg
• MPN: STP607R
• EAN: 5705965900116

How to use

Connect one RJ-45 connector to your network device (router, switch or modem) and the other RJ-45 connector to the destination device, patch panel or wall outlet. Ensure connectors are fully inserted until the latch clicks. Route the cable carefully to avoid sharp bends or kinks and keep it away from strong electrical noise sources when possible to preserve shielding effectiveness.

Recommendations

For best performance, use the MicroConnect STP607R in shielded or properly grounded installations when connecting equipment in environments with potential electromagnetic interference. Avoid excessive bending at the connector ends and do not exceed the recommended permanent link lengths for structured cabling to maintain Cat6 performance.