Pistosahanterä Bosch 2 608 656 931

The Bosch 2 608 656 931 jigsaw blade M 3456 XF is a bi-metal (BIM) blade with side-set, milled teeth designed for cutting a wide range of materials. With a total length of 235 mm and a thickness of 0.9 mm, it delivers durable performance for workshop and on-site use. Tooth spacing ranges from 2.2 to 4.6 mm (6–12 TPI), making the blade suitable for both fine and faster cuts across wood, plastics and thin metals.

Advantages

The bi-metal construction combines flexibility and wear resistance to extend blade life when cutting mixed materials. Side-set, milled teeth provide efficient chip removal and reduced splintering on wood and laminated surfaces. The blade’s dimensions and tooth pitch range allow consistent cutting performance from thin sheet metal and profiles to thick wooden boards and plastic pipes.

Suitable for

• Wood with nails or metal inserts (10–150 mm)
• Wooden boards and chipboard (10–150 mm)
• Sheet metals, pipes and profiles (5–18 mm)
• Plastic pipes and profiles (diameter 10–150 mm)

Key specifications

• Manufacturer: Bosch
• Model / Type: M 3456 XF
• Material: Bi-metal (BIM)
• Tooth design: Side set, milled
• Tooth spacing: 2.2–4.6 mm (6–12 TPI)
• Total length: 235 mm
• Thickness: 0.9 mm
• MPN: 2608656931
• EAN: 3165140413435

How to use

Fit the Bosch 2 608 656 931 jigsaw blade into a compatible jigsaw following the tool manufacturer’s blade-change instructions. Secure the blade so the teeth face the workpiece and ensure the blade is straight before switching on the tool. Select an appropriate feed rate and speed for the material being cut — slower speeds and steady feed for metals, moderate speeds for hardwood, and faster feed for softer woods and plastics. Use proper clamps and supports to stabilise the workpiece and reduce vibration for cleaner cuts.

Recommendations

For best results, match blade speed and feed to the material: lower speed for metals and laminated boards to minimise overheating and burrs; higher speed for plastics and softwood to improve cutting rate. Inspect the blade periodically and replace it when cutting quality degrades or teeth show wear.