PLA 3D-tulostusfilamentti Creality Hyper Carbon beige 1,75 mm 1 kg

Creality PLA Hyper Carbon Beige 1.75 mm is a 1 kg spool of PLA filament formulated for FDM/FFF 3D printers that accept 1.75 mm filament. The material combines the ease of printing and low-warp behaviour of standard PLA with a textured, carbon-like beige appearance that is suitable for visible prototypes, decorative objects and hobby models. The filament is supplied on a standard spool that fits most consumer and prosumer extruders and is intended for general-purpose printing where a neutral, slightly textured beige finish is desired.

Advantages

The Creality PLA Hyper Carbon Beige filament offers reliable dimensional stability, low odor during printing and good layer adhesion typical of PLA. Its formulation provides a subtle textured surface resembling carbon fiber patterns while maintaining the printability and low-warp properties of standard PLA, reducing the need for tightly controlled build-plate conditions. The 1.75 mm diameter is manufactured to consistent tolerances to help ensure steady extrusion and predictable results across a wide range of printers.

Suitable for

• Prototyping and concept models
• Hobby and scale models
• Decorative prints and display pieces
• Functional parts with non-structural requirements

Key specifications

• Material: PLA (polylactic acid)
• Color/finish: Beige with carbon-like textured appearance
• Diameter: 1.75 mm nominal
• Net weight: 1 kg spool
• Recommended extrusion temperature range: typical PLA settings (refer to printer and slicer for exact values)
• Compatibility: FDM/FFF 3D printers designed for 1.75 mm filament

How to use

Load the Creality PLA Hyper Carbon Beige filament into a printer configured for 1.75 mm material, purge any previous filament and confirm smooth feeding through the extruder. Use typical PLA print settings as a starting point: moderate nozzle temperatures and a heated bed if your printer supports it; many prints succeed without a heated bed when good bed adhesion methods are used. Adjust print speed, retraction and temperature based on layer adhesion and surface finish observed in test prints. Store unused filament on the spool in a dry environment to minimise moisture uptake.

Recommendations

For best results, begin with a temperature tower or small test piece to fine-tune nozzle temperature and print speed for your specific printer. Use a flat, clean build plate and consider a brim or raft for larger flat parts to reduce edge lifting. Keep the spool protected from humidity when not in use to preserve consistent extrusion.