Polymaker PolyLite PLA 3D-tulostin-filamentti 1,75mm 1kg magenta PA02054

Finding a reliable PLA filament that prints consistently without warping or clogging can be a challenge. Polymaker PolyLite PLA in Magenta solves this with its high-quality Polylactic Acid formulation, engineered for smooth extrusion and excellent layer adhesion on virtually any FDM 3D printer.

Who is it for

This filament is ideal for hobbyists, educators, and professionals who need a dependable, easy-to-print material for prototypes, models, and decorative items. Its vibrant magenta colour makes it perfect for eye-catching prints.

Main features

• Material: Polylactic Acid (PLA) – biodegradable under industrial composting conditions
• Diameter: 1.75 mm with tight tolerance of ±0.03 mm for consistent flow
• Net weight: 1 kg spool, vacuum-sealed with desiccant to prevent moisture
• Spool made from recycled cardboard for eco-friendly disposal
• Low odour during printing
• Recommended extruder temperature: 190-230 °C
• Recommended bed temperature: 25-60 °C or off

Specifications

• Density: 1.24 g/cm³
• Tensile strength: 35.4 MPa
• Elongation at break: 15.2 %
• Vicat softening temperature: 57 °C
• Heat deflection temperature (0.45 MPa): 55 °C
• Shore hardness: D60
• Melt flow index: 9.2 g/10min (210°C, 2.16kg)

Tips

Store the filament in a dry place or use a filament dryer to maintain optimal print quality. For best results, print with a nozzle temperature around 210°C and a bed temperature of 50°C.