Polymaker PolySonic PLA High-Speed -filamentti 1,75mm keltainen 1kg (PA12006)

Polymaker PolySonic PLA High-Speed is engineered for ultra-fast printing, delivering superior layer adhesion and surface quality at speeds up to 500 mm/s. This yellow 1.75 mm filament combines high-flow PLA with a tight ±0.02 mm diameter tolerance for consistent extrusion on high-speed FDM printers.

Highlights

• High-speed PLA formulated for printing up to 500 mm/s
• Excellent layer adhesion and surface finish even at high speeds
• Precision diameter of 1.75 mm with ±0.02 mm tolerance
• Low shrinkage and low odor for a pleasant printing experience
• Vacuum-sealed with desiccant to maintain dryness

In daily use

PolySonic PLA High-Speed prints reliably with nozzle temperatures from 190 to 230 °C and bed temperatures from 25 to 60 °C. Its low shrinkage reduces warping, while the cardboard spool is easy to recycle. The filament’s high flow characteristics allow you to push your printer to its limits without sacrificing part quality.

Full specifications

• Material: PLA (Polylactic Acid)
• Filament Type: High-Speed
• Diameter: 1.75 mm
• Tolerance: ±0.02 mm
• Net Weight: 1 kg
• Recommended Nozzle Temperature: 190-230 °C
• Recommended Bed Temperature: 25-60 °C
• Recommended Print Speed: Up to 500 mm/s
• Tensile Strength: 50.5 ± 1.8 MPa
• Elongation at Break: 10.5 ± 1.5 %
• Density: 1.24 g/cm³
• Vicat Softening Temperature: 58.6 °C
• Heat Deflection Temperature (HDT): 52.3 °C
• Spool Material: Cardboard

Final note

Polymaker PolySonic PLA High-Speed is the go-to filament for makers who demand speed without compromising on quality.