Pumppu Gardena 6500 SilentComfort

The Gardena 6500 SilentComfort pump is a garden water pump engineered for reliable water transfer and pressure delivery. With a robust 1300 W motor it provides a high flow rate and is constructed with stainless steel elements and an IPX4 splash protection rating, making it suitable for outdoor garden environments. Its compact footprint—244 mm wide, 634 mm deep and 331 mm high—allows convenient placement and storage while delivering a maximum pressure of 6 bar and a delivery height up to 60 m.

Advantages

The pump combines a powerful motor with a design focused on reduced operational noise, allowing continuous garden use with minimal disturbance. Stainless steel construction and splash-resistant protection increase durability and resistance to weather-exposed conditions. A high flow rate of up to 6500 l/h supports efficient irrigation and water transfer tasks, while compact dimensions simplify installation in limited-space utility areas or garden sheds.

Suitable for

• Irrigation of lawns, flowerbeds and vegetable gardens
• Water circulation for rainwater harvesting systems and storage tanks
• Filling and emptying small ponds or water features
• Supplying water to sprinkler systems and drip irrigation

Key specifications

• Motor power: 1300 W
• Maximum flow rate: 6500 l/h
• Maximum pressure: 6 bar
• Maximum delivery height: 60 m
• Body material: stainless steel components
• Protection rating: IPX4 (splash resistant)
• Dimensions (W × D × H): 244 × 634 × 331 mm

How to use

Position the pump on a firm, level surface close to the water source and ensure adequate ventilation around the unit. Connect suction and discharge hoses according to the manufacturer’s connection points, making sure fittings are secure to prevent air leaks. Verify that electrical supply matches the pump’s requirements and use a properly rated power connection with grounding. Prime the pump if required by the installation instructions, then switch on and monitor for steady flow and correct pressure. Inspect connections and seals after initial operation to confirm there are no leaks.

Recommendations

For reliable long-term operation, avoid running the pump dry and protect it from severe frost. Use appropriate filtration on the suction side to reduce debris intake and perform periodic inspection of seals and stainless steel surfaces. Follow local electrical safety regulations when connecting the pump and consider professional installation for integrated irrigation systems to ensure correct pressure and flow balance.