Rittal laiteadapteri 65 A AWG RX 93607606 3-napainen, leveys 54 mm, liitäntäasento 1=4

Device adapter Rittal 65 A AWG RX 93607606 is a 3‑pole connector designed for installation in electrical enclosures and control cabinets. With a rated current of 65 A and a mounting width of 54 mm, this compact adapter provides a standardized interface for connecting devices and distributing power inside industrial installations and service panels. The connector is specified with a socket/position designation 1=4 to aid correct wiring and module arrangement.

Advantages

The adapter’s compact 54 mm width saves panel space while supporting moderate current loads up to 65 A, making it suitable for dense cabinet layouts. Its three‑pole design enables straightforward line, neutral and protective conductor connection or multi‑phase arrangements where applicable. The clear socket/position marking simplifies assembly and maintenance by reducing wiring errors and speeding up component replacement.

Suitable for

Key specifications

How to use

Mount the adapter on the designated rail or panel space inside the enclosure following the cabinet layout and safety distances. Connect conductors to the three poles using appropriately sized ferrules or terminals and ensure secure tightening to the specified torque values for the installation. Observe standard wiring practices: de‑energize circuits before installation, verify conductor cross‑sections match the 65 A rating, and follow local electrical codes and enclosure manufacturer instructions.

Recommendations

Use this 3‑pole adapter with conductors and protective devices sized for 65 A. For reliable operation, perform periodic inspections of connection tightness and signs of overheating; replace the adapter if mechanical damage or corrosion is present. Coordinate adapter placement with adjacent modules to maintain required clearance and accessibility for maintenance.