Mikrofoni RØDE VideoMic Pro Rycote

The RØDE VideoMic Pro Rycote is a compact on-camera stereo microphone designed for professional location recording with DSLR and video cameras. It combines a matched pair of 1/2" condenser capsules in an XY configuration for a wide, natural stereo image, a built-in Rycote® Lyre® shock mount to reduce handling noise, and on-microphone power and EQ controls for flexible use in the field.

Advantages

The microphone uses all-new matched 1/2" condenser capsules in an XY stereo configuration to deliver broadcast-quality stereo recordings with natural depth. An integrated Rycote® Lyre® shock mounting system separates the capsules and electronics from the camera mount to minimise rumble and vibration; the Lyre® is made from a single piece of durable thermoplastic for long-lasting acoustic suspension. The design also includes an improved foam windscreen, Kevlar-reinforced braided cable, lightweight compact form factor, billeted metal camera shoe mount with 3/8" thread for boompole use and on-mic controls including a two-step high-pass filter and three-position level control. The microphone runs on a 9V battery for over 100 hours (alkaline) and is covered by a 10-year extended warranty when registered.

Suitable for

• DSLR and mirrorless video recording
• Consumer and professional camcorders
• Location stereo recording of music and ambience
• Run-and-gun filmmaking and ENG (electronic news gathering)

Key specifications

• Capsules: Matched pair 1/2" condenser in coincident XY
• Frequency response: 40 Hz – 20 kHz
• Impedance: 200 Ω
• Maximum SPL: 134 dB
• Weight: 116 g
• Power: 9V battery (alkaline), >100 hours
• Controls: Two-step high-pass filter (flat / 75 Hz), three-position level control (-10 dB / 0 / +20 dB)
• Mount: Integrated Rycote® Lyre® shock mount; billeted metal shoe mount with 3/8" thread

How to use

Mount the microphone to your camera shoe or to a boompole using the 3/8" thread. Insert a 9V alkaline battery and set the rear-panel controls to suit the recording situation: choose the flat or 75 Hz high-pass filter to reduce low-frequency noise, and select the appropriate level position (-10 dB for loud sources, 0 for normal levels, +20 dB when additional boost is needed for low camera preamps). Position the microphone on-axis toward the main sound source for best clarity and ensure the foam windscreen is fitted for outdoor use.

Recommendations

For reduced handling and camera noise, keep cable routing taut and use the Kevlar reinforced braided cable. Use the -10 dB pad for high SPL environments such as live music, and enable the +20 dB boost when recording with consumer DSLR preamps to improve signal-to-noise ratio. Register the product to activate the 10-year warranty.