Ruuvien ja tulppien sarja Fischer 46332

The Fischer 46332 screw & wall plug kit contains 50 Torx-head screws with matching wall plugs designed for masonry applications in brick and concrete. Each screw measures 120 mm in length and requires a 10 mm drill hole with a minimum embedment depth of 130 mm to achieve the specified anchoring performance. Supplied in a compact storage box, the kit is intended to provide ready access to anchors for general construction, installation, and repair tasks.

Advantages

The kit combines corrosion-resistant Torx screws and plastic wall plugs selected for reliable load transfer in solid masonry. The long screw length and specified drill hole diameter ensure deep embedment for greater pull-out resistance. Packaged in a reusable box, the set simplifies handling on site and reduces the need to source individual components separately.

Suitable for

• Fixing heavy fixtures to brick or concrete walls
• Mounting shelving, rails, and brackets
• General construction and renovation anchoring tasks
• Exterior and interior installations where solid masonry anchoring is required

Key specifications

• Quantity: 50 pieces (screw + wall plug set)
• Screw length: 120 mm
• Recommended drill hole diameter: 10 mm
• Minimum embedment depth: 130 mm
• Drive type: Torx
• Intended base materials: brick, concrete (solid masonry)
• Packaging: reusable storage box

How to use

Drill a clean, straight hole of 10 mm diameter to at least 130 mm depth into solid masonry. Clean the hole of dust and debris before inserting the wall plug. Place the plug flush with the surface and drive the Torx screw through the fixture into the plug until secure, avoiding over-torquing. Verify that the screw is fully engaged and that the fixture is held firmly against the substrate. For repeated installations, organize remaining parts in the supplied box to maintain condition and accessibility.

Recommendations

Confirm the suitability of the wall plug for the specific masonry type and the load requirements of your application. Use a torque-controlled driver when possible and follow local building codes. For hollow or weak substrates, select an alternative anchor system designed for those conditions. Store the kit in a dry place to preserve screw finish and plug integrity.