SATA-III-kaapeli ShiverPeaks 78246-1.0 1 m, tukee 3 Gb/s ja 6 Gb/s

SATA III cable ShiverPeaks 78246-1.0 is a 1 meter internal PC data cable that supports both 3 Gb/s and 6 Gb/s link speeds. It provides a standard SATA plug-to-plug connection with metal retention clips for secure attachment to drives and motherboard connectors. Intended for internal use in desktop and server systems, the cable enables data transfer between SATA-compatible storage devices such as HDDs, SSDs and optical drives and host controllers or motherboard ports.

Advantages

The cable supports legacy 3 Gb/s and modern 6 Gb/s SATA link rates, allowing compatibility with a wide range of SATA devices. Its 1.0 m length offers flexibility for routing inside various PC chassis while keeping signal integrity for typical internal installations. Metal retention clips on the plugs help ensure stable mechanical connection and reduce the risk of accidental disconnection during maintenance or transport.

Suitable for

• Connecting 2.5" and 3.5" hard disk drives to a motherboard or controller
• Connecting SATA solid state drives (SATA SSDs) inside desktop PCs and servers
• Connecting SATA optical drives such as DVD or Blu-ray drives
• Internal cable replacement or upgrades in desktop and server systems

Key specifications

• Cable type: SATA plug-to-plug internal data cable
• Supported link speeds: 3 Gb/s and 6 Gb/s
• Length: 1.0 meter
• Connector retention: metal clips on plugs for secure attachment
• Compatibility: standard SATA devices (HDD, SSD, optical drives) and motherboard/controller SATA ports

How to use

Route the SATA III cable inside the PC chassis from the motherboard or controller SATA port to the SATA device connector, taking care to avoid tight bends and sharp edges. Align the keyed SATA plug with the device and motherboard connectors and press until the metal retention clip engages. Ensure the system is powered off and disconnected from mains power before connecting or disconnecting the cable to prevent data corruption or electrical damage. After installation, power on the system and verify that the storage device is detected by the BIOS/UEFI or operating system.

Recommendations

For reliable operation, keep the cable length and routing clear of fans and high-voltage wiring, avoid excessive bending radii, and replace the cable if connectors show wear or if data errors are observed. Use the cable for internal connections only; it is not intended for external or hot-plug environments beyond standard SATA device support.