SATA-kaapeli DeLOCK 0,1 m 2x SATA III

The DeLOCK SATA cable with a length of 0.1 m features two SATA 7-pin connectors and supports the SATA III standard with data transfer rates up to 6 Gb/s. Designed for internal PC use, the cable allows you to extend or replace a SATA connection between drives and motherboard or other SATA devices. The SATA 6 Gb/s interface is backwards compatible with earlier SATA versions, although the achievable transfer speed will be limited to the older standard.

Advantages

This SATA Cable DeLOCK 0.1m 2xSATAIII provides a compact connection solution for installations with limited space, offers support for high-speed data transfer up to 6 Gb/s, and features standard 7-pin SATA connectors on both ends. The cable is manufactured with materials suitable for reliable internal PC connectivity and is available in a black and yellow colour scheme.

Suitable for

• Connecting internal SATA drives (HDD, SSD) to a motherboard
• Extending or replacing existing SATA connections in compact PC builds
• Use in small form-factor PCs, NAS enclosures, or test benches

Key specifications

• Cable type: SATA III
• Cable length: 0.1 m
• Connectors: 2 × SATA 7‑pin
• Maximum data transfer rate: up to 6 Gb/s
• Product colour: Black, Yellow
• Brand: DELOCK
• MPN: 83948
• EAN: 4043619839483

How to use

Power off the system and unplug it from the mains before connecting the cable. Align each 7-pin SATA connector with the corresponding SATA port on the drive and the motherboard, then insert gently until it is seated. After installation, restore power and verify that the drive is detected by the BIOS/operating system. Avoid forcing the connector or bending the cable sharply to prevent damage.

Recommendations

Use the 0.1 m cable in installations where short, tidy connections are required. For optimal performance, ensure device and controller support SATA III; otherwise transfer speeds will be limited by the slower device or port.