SATA-kaapeli DeLOCK 82469 0,1 m keltainen

This SATA cable by Delock enables connection between SATA devices such as SATA hard drives and SATA controllers. The cable is 0.1 m long and has a yellow jacket, making it suitable for compact installations and cable routing in confined spaces. When connected to a hard drive the connector orientation leads the cable downwards, and metal clips on the SATA connectors provide additional retention.

Advantages

The cable complies with the SATA II specification and supports data transfer rates up to 3 Gbps. Metal clips on both connectors secure the cable in place to prevent accidental disconnection. Its short 0.1 m length reduces excess cabling and improves airflow in tight PC interiors.

Suitable for

• Connecting internal SATA hard drives (HDD) to a SATA controller
• Use in small form factor PCs or drive bays with limited space
• Short cable runs where a compact, tidy connection is required

Key specifications

• Standard: SATA II
• Data transfer rate: up to 3 Gbps
• Length: 0.1 m
• Colour: yellow
• Connector orientation: one connector down / one straight
• Retention: metal clips on SATA connectors

How to use

Align the SATA connector with the SATA port on the hard drive or controller and push until the metal clip snaps into place. When connecting to a hard drive, the cable is designed to lead downwards from the drive; ensure the orientation matches your drive bay layout. To disconnect, press the metal clip to release the connector and pull it straight out.

Recommendations

Use the cable for internal connections only; avoid excessive bending or pulling. For reliable operation, keep cable runs short and avoid routing near high-power or high-interference sources. Verify that the straight and down-oriented connectors match the ports in your system before installation.