SATA-kaapeli DeLOCK 82810 0,5 m SATA 7-napainen keltainen

This SATA cable by Delock enables the internal connection of various SATA devices such as HDDs, controller cards or flash memories. It follows the SATA III standard and supports data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions. The cable is 0.5 m long and comes in yellow with SATA 7‑pin connectors on both ends; the metal clips on the connectors ensure a secure, audible click when mated.

Advantages

The DeLOCK 82810 offers a compact 0.5 m length suitable for internal cabling, support for SATA III speeds up to 6 Gb/s, and downward compatibility with previous SATA generations. Its yellow jacket improves visibility inside a PC case, and metal locking clips provide a reliable mechanical connection.

Suitable for

• Connecting 2.5" or 3.5" SATA hard drives (HDD) and SATA SSDs
• Internal connection of controller cards with SATA ports
• Connecting internal flash memory devices with SATA interface

Key specifications

• Brand: DELOCK
• Model / MPN: SATA6-101 (DeLOCK 82810)
• EAN: 4043619828104
• Cable length: 0.5 m
• Connectors: SATA 7‑pin to SATA 7‑pin
• Standard: SATA III, up to 6 Gb/s (backwards compatible)
• Colour: Yellow

How to use

Route the 0.5 m SATA cable inside the computer case so that the connector aligns with the SATA port; when used with a hard drive in the shown orientation the cable will be led upwards. Press each connector onto the device’s SATA port until the metal clip engages and clicks, ensuring a firm connection. Power the device using a separate SATA power cable from the PSU; this data cable does not supply power.

Recommendations

The cable is intended for internal use only. Avoid sharp bends and excessive force when connecting or routing the cable. For maximum transfer speed, connect both devices to SATA III ports; when used with older SATA ports the transfer speed will be limited to the respective standard.