SATA-kaapeli DeLOCK 83969 0,5 m SATA 7-napainen musta punainen

The DeLOCK 83969 SATA cable is a 0.5 m internal data cable with two SATA 7-pin connectors designed to connect HDDs, SSDs, controller cards and other SATA devices inside a PC. It supports the latest SATA standard with data transfer rates up to 6 Gb/s and is backward compatible with earlier SATA versions (limited to their respective speeds). The cable has a black and red design and a right-angled routing when connected to a hard drive.

Advantages

The cable supports up to 6 Gb/s transfer speed and is backward compatible with previous SATA generations. Fixed metal clips on the connectors provide a secure, audible click when connected to devices. The 0.5 m length is suitable for internal connections in compact and mid-tower systems, and the two standard SATA 7-pin connectors ensure compatibility with common SATA devices.

Suitable for

• Connecting internal HDDs and SSDs to motherboard or controller cards
• Installing or replacing SATA drives in desktop PCs
• Small form-factor or mid-tower systems where a 0.5 m cable length is sufficient

Key specifications

• Brand: DELOCK
• Manufacturer part number (MPN): 83969
• EAN: 4043619839698
• Cable length: 0.5 m
• Connectors: SATA 7-pin to SATA 7-pin
• Colour: Black, Red
• Max. data transfer rate: 6 Gb/s (SATA III)

How to use

Turn off the computer and disconnect power before installing. Align each SATA 7-pin connector with the corresponding SATA port on the drive and the motherboard or controller card, then press until the metal clip clicks into place. When connecting to a hard drive, the cable routes to the right from the drive's connector. After installation, restore power and verify that the drive is detected in the system BIOS or operating system.

Recommendations

Use the cable for internal connections only; avoid excessive bending or pulling. For optimal airflow and cable management, route the cable along chassis cable channels and secure with ties if needed. If you need longer routing or different connector orientations, select an appropriate cable length or type.