SATA-kaapeli DeLOCK 85232 0,3 m SATA 7-napainen + Molex 4-napainen SATA 22-napainen musta

The DeLOCK 85232 is a 0.3 m SATA cable designed to connect SATA 7-pin data interfaces and devices that require a 4-pin Molex power connector to SATA 22-pin housings. Its compact length and combination of a 7-pin SATA plug with a 4-pin Molex power lead make it suitable for installations where space is limited and a direct connection between storage devices and power sources is needed. The cable is finished in black and intended for internal PC use with SATA hard drives and solid-state drives.

Advantages

The cable combines a SATA 7-pin data connector with a Molex 4-pin power lead, enabling both data and power routing where separate connectors are not convenient. Its 0.3 m length reduces cable clutter in compact cases and improves routing options behind drive bays and motherboards. The black exterior provides a discreet appearance inside most PC builds. Durable construction and standardized connector types ensure compatibility with SATA 22-pin device housings and common Molex power outputs.

Suitable for

• Connecting internal SATA hard drives and SSDs in compact desktop or small form factor cases
• Converting or routing power from a Molex 4-pin power supply connector to a SATA device
• Short cable runs behind drive cages, on motherboards, or in tight chassis spaces

Key specifications

• Cable length: 0.3 m
• Data connector: SATA 7-pin
• Power connector: Molex 4-pin
• Compatible device interface: SATA 22-pin housings
• Color: Black

How to use

Connect the SATA 7-pin plug to the SATA data port on the drive or motherboard and attach the Molex 4-pin connector to a compatible Molex power output from the power supply. Ensure connectors are aligned and seated without forcing; the keyed shapes prevent incorrect orientation. Route the 0.3 m cable to avoid contact with fans or sharp edges and secure it with cable ties if necessary. Verify power and data connections before powering on the system.

Recommendations

Use this cable for short internal connections where a combined SATA data and Molex power solution is required. Avoid bending the cable sharply near the connectors and keep the cable away from heat sources. If using in a multi-drive configuration, ensure the power supply provides sufficient current for all connected devices.