SATA-kaapeli pistoke/pistoke 0,5 m DeLOCK 82829 keltainen

The DeLOCK SATA Cable Male/Male 0.5m (model 82829) is a 0.5 metre internal data cable for connecting SATA devices such as hard disk drives, controller cards or SATA flash drives. The cable supports the SATA III standard with up to 6 Gb/s data transfer and is backwards compatible with earlier SATA revisions. The cable is finished in yellow and features metal clips on the connectors for additional snap-in retention.

Advantages

This SATA cable supports transfer rates up to 6 Gb/s while remaining compatible with previous SATA versions. The 0.5 m length provides flexible routing inside a computer chassis. Male-to-male SATA connectors with metal retention clips ensure a secure connection and predictable cable orientation when plugged into a drive.

Suitable for

• Internal connection of 2.5" and 3.5" SATA HDDs
• SATA SSDs and SATA flash drives
• Connection to SATA controller cards and motherboard SATA ports

Key specifications

• Brand: DELOCK
• Model / MPN: 82829
• Cable type: SATA Male to Male
• Length: 0.5 m
• Data transfer rate: up to 6 Gb/s (SATA III), backwards compatible
• Colour: Yellow

How to use

Align the SATA connector with the device socket and press the connector in until the metal clip secures it. When connecting to a hard drive, the cable is intended to be routed so the connector leads to the right side of the drive. Ensure both ends are fully seated and that the connected device and host are powered off when making or removing connections to avoid data corruption.

Recommendations

Use the cable for internal connections inside a PC case. Avoid sharp bends or kinks and keep the cable clear of moving parts and hot components. For best performance, use in combination with SATA III capable devices to achieve up to 6 Gb/s throughput.