SATA-kaapeli pistoke/pistoke DeLOCK 0,7 m keltainen 82814

This SATA cable from DeLOCK supports the SATA III standard with data transfer rates up to 6 Gb/s and is intended for internal connections between motherboards and SATA storage devices. The cable has male connectors on both ends and a length of 0.7 m; the yellow colour helps identify connections inside the PC. The SATA connector includes metal clips for additional snap-in retention, and the SATA 6 Gb/s interface is backwards compatible with earlier SATA versions (operating at the respective lower transfer speeds).

Advantages

The DeLOCK 0.7m SATA Male/Male cable provides stable data transfer up to 6 Gb/s and secure mechanical retention via metal clips. Its 0.7 m length is suitable for typical internal routing inside a PC case, and the yellow jacket simplifies cable identification. Backwards compatibility ensures it can be used with older SATA devices at their supported speeds.

Suitable for

• Connecting internal HDDs and SSDs to motherboards
• Connecting SATA controller cards to storage devices
• Internal cable routing in PC builds where a 0.7 m length is sufficient

Key specifications

• Brand: DELOCK
• Model / MPN: 82814
• EAN: 4043619828142
• Cable type: SATA Male to Male
• Length: 0.7 m
• Colour: Yellow
• Interface: SATA up to 6 Gb/s (SATA III), backwards compatible

How to use

Connect one male SATA connector to the SATA port on the motherboard or controller card and the other male connector to the SATA device (HDD or SSD). When connecting to a hard drive, the cable is designed to lead downwards from the drive. Ensure both connectors are fully seated until the metal clips engage to secure the connection. Power the system only after secure data and power connections are in place.

Recommendations

For reliable operation, avoid sharp bends and excessive tension on the cable and route it to prevent contact with moving parts or hot components. Use the 0.7 m length for internal connections where this reach is appropriate, and replace the cable if connectors appear damaged or loose.