Seinä-ankkuri Fischer 62754 ruuvi-ankkuri 35 mm

The Fischer 62754 screw anchor 35 mm is a compact wall plug designed for secure fastening in solid masonry such as brick and concrete. With a 35 mm length and a nominal drill diameter of 6 mm, this anchor provides stable anchoring for light to medium loads where a reliable mechanical connection is required. Each box contains 100 pieces, offering a practical quantity for renovation, installation, and construction tasks.

Advantages

This screw anchor combines a short installation length with high holding stability in solid base materials. Its geometry is engineered to expand and lock inside drilled holes in brick and concrete, reducing the risk of pull-out. The 6 mm drill diameter and 35 mm anchor length make it suitable for installations where wall thickness or clearance is limited. Supplied in a pack of 100, it simplifies procurement for multiple fixings and small projects.

Suitable for

• Mounting shelves and small cabinets on brick or concrete walls
• Fixing conduit clips, cable trays and light fixtures
• Securing brackets and frames where a compact anchor is required
• General repair and renovation tasks in masonry structures

Key specifications

• Anchor length: 35 mm
• Recommended drill hole diameter: 6 mm
• Minimum drill hole depth: 45 mm
• Material compatibility: solid masonry (brick, concrete)
• Pack quantity: 100 pieces

How to use

Drill a hole with a 6 mm masonry drill bit to a minimum depth of 45 mm. Clean the hole from dust and debris using a brush or compressed air to ensure full contact between the anchor and the base material. Insert the Fischer screw anchor into the hole until its head is flush with the surface, then drive an appropriate screw to expand the anchor and create a firm hold. Observe recommended screw dimensions and do not overtighten to avoid damaging the anchor or substrate.

Recommendations

Use the anchor only in solid masonry substrates such as brick and concrete. For hollow or perforated blocks, or for applications requiring higher load capacities, choose an anchor specifically designed for those substrates. For safe installation, match screw length and diameter to the anchor size and the thickness of the fixture.