SFP-lähetin-vastaanotinmoduuli BlueOptics 02315233-BO 155 Mbit/s 1310 nm

The BlueOptics 02315233-BO SFP transceiver module provides optical data transfer at a maximum rate of 155 Mbit/s using a 1310 nm wavelength and an LC duplex fiber connector. Designed to the SFP form factor, this grey module supports single-pair transmit and receive operation over multi-mode fiber and is suitable for integration into network equipment that accepts SFP modules. The module follows MSA-compatible electrical and mechanical specifications for pluggable transceivers and is intended for use in Ethernet and related optical link applications.

Advantages

This SFP transceiver offers a compact SFP interface and an LC fiber connector for straightforward integration into switches, routers and other network devices. Operation at 1310 nm with a 155 Mbit/s data rate makes it suitable for legacy 100BASE-FX and similar optical links. The module is manufactured and tested to ensure interoperability with hardware that accepts compatible SFP transceivers, and its form factor simplifies hot-plug replacement and upgrades.

Suitable for

• 100BASE-FX and Ethernet optical links requiring 155 Mbit/s throughput
• Network switches, routers and storage devices with SFP ports
• Short- to medium-range multimode fiber connections using LC duplex connectors

Key specifications

• Interface type: SFP (Small Form-factor Pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Wavelength: 1310 nm
• Connector: LC duplex fiber optic connector
• Product colour: Grey

How to use

Insert the SFP module into a compatible SFP slot on the target device while the device is powered according to the vendor’s instructions or using hot-plug procedures if supported. Connect LC duplex fiber patch cords between transmit and receive ports, ensuring correct polarity. Verify link status and configuration in the device management interface and set the appropriate protocol or speed if required by the host equipment. Follow any firmware or software compatibility notes from the device vendor to ensure stable operation.

Recommendations

Confirm that the host hardware supports SFP transceivers and the required 100BASE-FX link modes; use quality multimode fiber patch cords and maintain proper connector cleanliness to ensure reliable optical performance.