SFP+-lähetin-vastaanotinmoduuli BlueOptics 10GB-BX10-D-BO 10000 Mbit/s

The BlueOptics 10GB-BX10-D-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s network links. Built in an SFP+ form factor and finished in silver, this compact module supports a maximum data transfer rate of 10000 Mbit/s and is intended for use in data centers, campus networks and enterprise switches that accept SFP+ optics. The module meets CE, FCC and RoHS compliance and has a reported mean time between failures (MTBF) of 1,000,000 hours, offering a specification-focused choice for high-speed optical connections.

Advantages

The transceiver combines a standardized SFP+ form factor with 10 Gbit/s throughput to provide hot-pluggable optical connectivity without modifying existing port hardware. Compliance with CE, FCC and RoHS ensures it meets common regulatory and safety expectations. Its lightweight silver housing supports easy handling and installation while the high MTBF figure indicates long-term operational reliability under normal conditions.

Suitable for

• 10 Gbit/s uplinks between switches and routers
• Server-to-switch optical connections in data centers
• Fiber links in campus and enterprise environments
• Optical upgrades where SFP+ ports are available

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Product colour: Silver
• Weight: 0.02 kg
• Compliance: CE, FCC, RoHS
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Power down the host port or follow the device vendor's hot-plugging guidance before inserting the SFP+ module into a compatible SFP+ port. Align the module with the port guide rails and push gently until it clicks into place. Connect a suitable single-mode or multimode fiber patch cable as required by the optical specification of your network (verify wavelength and cable type separately). Monitor link status through the host device to confirm successful negotiation and link-up at 10 Gbit/s.

Recommendations

Use the module with matching SFP+ ports and compatible fiber types; consult switch or router documentation for supported optics. Avoid touching the optical interfaces — keep protective dust caps in place when not connected. For best results in critical links, test interoperability and link stability in a controlled setup before deployment.