SFP-lähetin-vastaanotinmoduuli BlueOptics 1184562P5-BO 125 Mbit/s kuitu

The BlueOptics 1184562P5-BO SFP transceiver module is a compact fiber optic interface designed for SFP ports. It supports a maximum data transfer rate of 125 Mbit/s and comes in an aluminium-coloured metal housing. Weighing approximately 20 g, the module provides a small form factor solution for fiber-based network links in switches, routers and other compatible devices.

Advantages

This SFP transceiver offers an industry-standard SFP interface that enables plug-and-play installation in compatible network equipment. The aluminium housing contributes to mechanical robustness and heat dissipation while keeping the module lightweight. Designed according to MSA guidelines, the module is suitable for interoperable use across devices that support standard SFP transceivers. The simple physical design and standard optical connector support straightforward integration into existing fiber infrastructures.

Suitable for

• Fiber connections between switches and routers with SFP ports
• Point-to-point links in local or campus networks
• Integration into storage or network hardware that accepts SFP modules
• Replacement of SFP transceivers in maintenance or upgrade scenarios

Key specifications

• Interface type: SFP
• Maximum data transfer rate: 125 Mbit/s
• Housing material/colour: aluminium-coloured metal
• Weight: approx. 0.02 kg

How to use

Ensure the host device supports SFP transceivers and is powered off or follows the manufacturer's hot-swap procedure. Gently insert the BlueOptics SFP module into the SFP slot until it clicks into place and secure any retention mechanism. Connect the appropriate fiber patch cable to the module's optical connector, observing transmit/receive orientation. Power on the device or verify link status; the equipment should detect the transceiver and negotiate the link according to the supported protocol. For fiber terminations and patching, use compatible LC duplex or other specified connectors and appropriate single-mode or multimode cabling as required by the network design.

Recommendations

Store and handle the module in a clean, static-free environment. Keep protective caps on optical ports when not connected to prevent contamination. Verify that the connected fiber type and connector match the link requirements and that the host device supports the module's data rate and SFP form factor.