SFP-lähetin-vastaanotinmoduuli BlueOptics H-BX10-SFP/I-U-BO 1250 Mbit/s

The BlueOptics H-BX10-SFP/I-U-BO 1250 Mbit/s is an SFP transceiver module designed for fiber optic networks. It supports a maximum data transfer rate of 1250 Mbit/s, uses an SFP interface with an LC simplex connection and is supplied in a silver enclosure weighing approximately 20 g. The module implements a bidirectional 1000BASE-BX-U design with separate transmit and receive wavelengths and includes Digital Diagnostics Monitoring (DDM/DOM) functionality, providing real-time information on supply voltage, laser bias current, transmit and receive power and temperature.

Advantages

The transceiver follows MSA standards and is manufactured with high-quality optical and electronic components to ensure long service life and stable performance. Tested compatibility with common hardware platforms ensures functional interoperability in switches, routers, storage systems and other network devices. Integrated digital diagnostics simplify remote monitoring and troubleshooting of optical links while the LC simplex connector and bidirectional transmission reduce cabling requirements.

Suitable for

Key specifications

How to use

Insert the transceiver into an SFP slot of a compatible switch, router or other network device while the host is powered down or following the device manufacturer's hot-swap guidelines. Connect an LC simplex single-fiber patch cable to the module, observing the correct orientation for transmit and receive ports and matching wavelengths. If using the DDM/DOM function, enable monitoring in the host device to read diagnostic parameters. Verify link status and configure the device port as required by your network topology and protocols.

Recommendations

Ensure host hardware supports 1000BASE-BX-U and the DDM/DOM interface to take full advantage of the module's features. Use quality single-fiber LC simplex patch cables and, when replacing modules, verify firmware or vendor compatibility settings specified by the equipment manufacturer to avoid link issues.