SFP-lähetin-vastaanotinmoduuli BlueOptics NTTP02CD-BO 155 Mbit/s 1310 nm

The BlueOptics NTTP02CD-BO SFP transceiver module is designed for optical networks requiring a 155 Mbit/s data rate and single-mode operation at a wavelength of 1310 nm. This compact, silver-coloured SFP module provides LC duplex connectivity and follows MSA-compatible SFP form-factor conventions to ensure interoperability with common network equipment such as switches, routers and storage interfaces. With a lightweight construction (approx. 20 g) and compliance with CE, FCC and RoHS standards, the module is suitable for installations where compatibility, safety and predictable lifetime behavior are important.

Advantages

The module offers stable optical transmission and reception at 1310 nm with a maximum transfer rate of 155 Mbit/s and an MTBF of around 3,000,000 hours, supporting long service life and reduced maintenance intervals. Compliance with industry safety and emissions standards ensures regulatory conformity while the standard SFP interface and LC duplex connector enable straightforward integration into existing fiber-optic links. The metal housing and compact size simplify handling and installation in dense equipment racks.

Suitable for

Key specifications

How to use

Power down or follow hot-swap precautions for your network device if required by the vendor, then insert the SFP module into an empty SFP slot until it clicks into place. Connect LC duplex fiber patch cables to the module making sure transmit and receive fibers are correctly oriented on both ends. Allow the host device to recognize the module; verify link status and wavelength compatibility in the device management interface. If digital diagnostics (DDM/DOM) are supported by the host, use monitoring tools to read optical power, temperature and supply voltage for ongoing verification of link health.

Recommendations

Ensure the host equipment supports 1310 nm SFP transceivers and the expected data rate. Use single-mode fiber with appropriate attenuation budgeting for the intended link distance and follow manufacturer guidelines for electrostatic discharge (ESD) protection during handling. When DDM/DOM monitoring is required, confirm the network device firmware supports SFF-8472 diagnostic readouts to enable real-time status checks.