SFP+ lähetin-vastaanotinmoduuli BlueOptics AFBR-703SDZ 10000 Mbit/s 850 nm

The BlueOptics AFBR-703SDZ is an SFP+ transceiver module designed for 10 Gbit/s data transmission over multimode fiber. Operating at an 850 nm wavelength, this compact module supports high-speed short-range connections in data centers and enterprise networks. It fits standard SFP+ ports and provides a cost-effective solution for upgrading or expanding fiber links where 10 Gbit/s performance and reliable optical signaling are required.

Advantages

The SFP+ form factor enables hot-pluggable installation and flexible deployment across compatible switches and servers. With a 10 Gbit/s maximum data transfer rate and 850 nm operating wavelength, the module is optimized for short-range multimode fiber applications and offers stable optical performance. Its compact design helps save port space and simplifies network scaling without the need for large, power-hungry transceivers.

Suitable for

• Short-range 10 Gbit/s fiber links in data centers
• Server-to-switch and switch-to-switch connections over multimode fiber
• Upgrading or expanding campus and enterprise backbone links

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Operating wavelength: 850 nm
• Form factor: hot-pluggable SFP+ optical transceiver
• Suitable fiber type: multimode fiber for short-range links

How to use

Install the BlueOptics AFBR-703SDZ into an available SFP+ port on a compatible network device while the device is powered down or follow the manufacturer's hot-plugging instructions. Connect a suitable multimode fiber patch cable with matching connectors to the transceiver. Configure the network device port settings as required for 10 Gbit/s operation and verify link status through the device management interface. Ensure proper fiber cleanliness and correct polarity before applying traffic.

Recommendations

For reliable operation, use multimode fiber certified for 10 Gbit/s links and maintain clean connector end faces. Verify compatibility with your switch or server vendor's supported transceiver list and observe recommended maximum reach for 850 nm multimode transmission to achieve expected performance.