SFP+ lähetin-vastaanotinmoduuli BlueOptics X6563-R6 X6600A-R6-BO 10000 Mbit/s

The BlueOptics X6563-R6 X6600A-R6-BO SFP+ transceiver module is designed for high-speed multimode fiber links with a maximum data transfer rate of 10000 Mbit/s. Housed in a durable metal casing in silver and weighing approximately 20 g, this compact SFP+ module follows MSA standards and provides LC duplex connectivity for simultaneous transmit and receive over separate fibers. The module incorporates 850 nm transmitter and receiver optics suitable for 10GBASE-SR applications and offers long operational life with an MTBF of around 1,000,000 hours.

Advantages

The transceiver provides 10 Gbit/s throughput over multimode fiber up to typical short-range distances supported by 10GBASE-SR, using standardized LC duplex interfaces for broad interoperability. Built to MSA specifications, the module is compatible with platforms that support the equivalent NetApp 10GBASE-SR SFP+ and includes components selected for reliability and stable optical performance. Its compact metal housing ensures robust mechanical protection while keeping weight and footprint low for easy installation and stacking in high-density network equipment.

Suitable for

Key specifications

How to use

Insert the SFP+ transceiver into a compatible SFP+ slot on your switch, router, or storage device following the host device manufacturer's hot-plugging procedure. Connect an LC duplex multimode fiber patch cable to the module, ensuring correct orientation of transmit and receive fibers. Configure the connected ports on your network devices for 10G operation if required by the host platform. Verify link status and monitor optical parameters where supported.

Recommendations

Use multimode OM3/OM4 patch cords for best short-range 10G performance and ensure the host equipment supports DDM/DOM if you require digital diagnostic monitoring. Avoid bending or stressing fiber cables and follow ESD precautions when handling the transceiver. For interoperability, use the module in devices that explicitly support equivalent 10GBASE-SR SFP+ transceivers.