Sisäinen virtakaapeli DeLOCK 84932 0,24 m

The DeLOCK 84932 internal power cable is a 0.24 m lead that converts a single 4-pin floppy power connector from the motherboard into two device power connectors: one 15-pin SATA and one 6-pin Slim SATA. It is intended for internal PC use where a floppy-style Molex power output must feed devices with standard and slim SATA power ports. The cable is supplied in a protective polybag.

Advantages

This internal power cable provides a compact solution to power both a standard 15-pin SATA device and a 6-pin Slim SATA device from a single floppy (4-pin) power connector. The short 0.24 m length reduces cable clutter inside the case, and the discrete multicolour wiring allows easy identification of connectors during installation.

Suitable for

• Supplying power to a 15-pin SATA drive when only a 4-pin floppy connector is available
• Powering devices with a 6-pin Slim SATA power port alongside a standard SATA device from one motherboard connector
• Small form factor or compact PC builds with limited internal power connectors

Key specifications

• Cable length: 0.24 m
• Connector 1: Floppy (4-pin)
• Connector 2: SATA 15-pin and Slim SATA 6-pin
• Brand: DELOCK
• MPN: 84932
• EAN: 4043619849321
• Product colour: Multicolour

How to use

Connect the 4-pin floppy power plug to the corresponding Molex-style power header on the motherboard. Then attach the 15-pin SATA connector to the standard SATA device and the 6-pin Slim SATA connector to the slim SATA device. Ensure connectors are fully seated and oriented correctly before powering the system. Route the cable to avoid contact with moving parts and sharp edges.

Recommendations

Use this cable only for internal PC power connections. Do not force connectors or use the cable if pins appear bent or damaged. Verify that the combined power draw of connected devices does not exceed the motherboard connector's capability; if in doubt, use a dedicated PSU connector or a powered adapter.