STEINEL IS 3360 MX-E KNX V3 AP liiketunnistin, HF-anturi, 360°, 1-8 m, KNX-väylä, valkoinen 058364

The STEINEL IS 3360 MX-E KNX V3 AP is a KNX presence and motion detector for indoor surface mounting. It uses high-frequency (HF) sensor technology at 5.8 GHz to detect motion through thin walls, glass, and light partition walls, covering a full 360° with a radial reach continuously adjustable from 1 to 8 m.

Advantages

Four independent switching channels can be configured via ETS software for lighting, HVAC, presence, or other KNX functions. The detection area is divided into 12 switching zones, allowing precise control of large rooms. The sensor operates directly on the KNX bus voltage (21-30 V DC) and is suitable for installation heights from 2.5 to 4.0 m.

Suitable for

• Corridors and stairwells
• Basements and cellars
• Multi-storey car parks
• Open-plan offices and meeting rooms

Key specifications

• Sensor technology: High-frequency (HF) 5.8 GHz
• Detection angle: 360°
• Reach: 1 – 8 m, continuously adjustable
• Mounting type: Surface-mounted (AP)
• Power supply: KNX bus voltage (21-30 V DC)
• Time setting: 10 s – 1092 min via ETS
• Twilight setting: 2 – 1000 Lux via ETS
• IP rating: IP20
• Operating temperature: -20 to +50 °C
• Housing material: UV-resistant plastic
• Colour: White (RAL 9010)

Recommendations

For reliable presence detection in large indoor areas, mount the detector at a height of 2.5 to 4.0 m and configure the 12 switching zones via ETS to match the room layout. The HF signal penetrates thin walls, so avoid placing the sensor near moving metal objects or strong electromagnetic sources.