Verkkokaapeli Lindy 2 m Cat.6 RJ-45 U/UTP harmaa

The Lindy 2m Cat.6 RJ-45 U/UTP Grey network cable provides a 2 metre connection for Ethernet devices and supports data rates up to 1GBase-T with operation frequencies up to 250 MHz. This unshielded (U/UTP) Cat.6 cable is manufactured and tested to ISO/IEC 11801 standards and comes individually packaged in a polybag. The cable is fitted with RJ-45 connectors on both ends and a snagless strain relief to protect the connector latch during installation and removal.

Advantages

The cable’s Cat.6 design and controlled electrophysical parameters (NExT, FExT, etc.) enable reliable Gigabit Ethernet performance despite the lack of shielding. Gold-plated contacts reduce the risk of corrosion and provide stable long-term connections. The snagless connector design minimises the chance of damage to the latch while plugging and unplugging. The compact grey cable is suitable for visible installations in home or office environments.

Suitable for

• Connecting PCs, routers and switches at 1GBase-T speeds
• Home and small office networking
• Patch panels and wall outlets in structured cabling

Key specifications

• Cable length: 2 m
• Connector type: RJ-45 to RJ-45
• Cabling technology: 10/100/1000Base-T(X)
• Category: Cat.6 U/UTP
• Operating frequency: up to 250 MHz
• Contacts: gold-plated
• Colour: Grey
• Standards: manufactured and tested to ISO/IEC 11801

How to use

Plug one RJ-45 connector into the network port of your device and the other into a switch, router or wall outlet. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and mechanical stress; the snagless strain relief protects the latch during installation and removal. No special configuration is required—devices will negotiate the appropriate network speed automatically.

Recommendations

For best performance, avoid running the cable parallel to high-voltage power lines and keep maximum bend radius recommendations in mind. Use for short to medium runs within homes and offices; for electrically noisy environments or longer distances consider shielded cabling or higher-category solutions.