Verkkokaapeli LogiLink C6A142S RJ-45 Cat6a 50 m harmaa

The LogiLink C6A142S is a certified Cat6a networking cable, 50 m in length, designed for data transfers up to 10 Gigabit Ethernet and frequencies up to 500 MHz. It features S/FTP shielding (pair shielding with overall copper braid), halogen-free flame-retardant jacket and RJ-45 connectors on both ends. The grey cable with slim overmoulded, snagless shielded RJ45 plugs provides reliable, low-interference connections for home and office networks.

Advantages

The S/FTP construction with individually shielded pairs and an overall copper braid reduces electromagnetic interference and crosstalk, supporting stable high-speed data transmission. The halogen-free, flame-retardant jacket improves safety in case of fire. Slim overmoulded, snagless shielded RJ45 plugs facilitate easy installation and a secure connection. The 50 m length is suitable for longer runs without signal repeaters.

Suitable for

• 10 Gigabit Ethernet networking
• High-bandwidth applications such as gaming and UHD streaming
• Office and home structured cabling over longer distances (50 m)
• Environments requiring reduced EMI and improved signal integrity

Key specifications

• Cable type: Cat6a (C6A142S)
• Length: 50 m
• Shielding: S/FTP (shielded pairs + overall copper braid)
• Connectors: RJ-45 to RJ-45, shielded, slim overmoulded snagless plugs
• Rated for: 10GBase-T, up to 10 Gigabit Ethernet
• Frequency: up to 500 MHz
• Jacket: halogen-free, flame retardant
• Color: Grey

How to use

Connect each RJ-45 connector to the corresponding network ports on your devices or patch panels. Ensure connectors are fully inserted until the latch engages. Route the cable avoiding sharp bends and sources of strong electromagnetic interference. For best performance, keep the run within recommended length limits and avoid kinking or crushing the cable.

Recommendations

Use the LogiLink Cat6a cable for backbone or workstation connections where 10 Gigabit throughput and low interference are required. For long permanent installations, follow local cabling standards and maintain separation from power lines to minimise EMI.