Verkkokaapeli Microconnect CAT6A UTP RJ-45 0,15 m harmaa

The MicroConnect CAT6a Patch Cable (0.15 m) is a short, high-performance U/UTP network cable designed for reliable connections in environments that require 10 Gbit/s speeds and bandwidth up to 500 MHz. It uses RJ-45 connectors with 50 μin gold plating for improved conductivity and latch protection to reduce the risk of clip breakage. Meter markings on the boot help quickly identify the cable length.

Advantages

This CAT6A UTP cable supports data transfer rates up to 10000 Mbit/s and is built to reduce interference with its unshielded twisted pair design. Gold-plated RJ-45 contacts increase durability and ensure stable signal transmission. The short 0.15 m length is suited for neat, low-latency patching between nearby ports, while the reinforced latch and meter marking add practical durability and ease of use.

Suitable for

• Short patch connections in network racks and switches
• Connecting servers, NAS or network appliances in close proximity
• High-speed 10Gbit links where minimal cable length is required

Key specifications

• Length: 0.15 m
• Standard: CAT6A (10GBASE-T)
• Maximum data rate: 10000 Mbit/s
• Bandwidth: up to 500 MHz
• Connector type: RJ-45 to RJ-45
• Contacts: gold-plated (50 μin)
• Shielding: U/UTP (unshielded overall, twisted pairs)
• Colour: Grey

How to use

Plug one RJ-45 connector into the network port of your device and the other into the switch, patch panel or router port. Ensure connectors click into place to confirm latch engagement. Use the 0.15 m cable for short-distance connections to minimize signal loss and cable clutter. Check meter marking on the boot if you need to verify the cable length quickly.

Recommendations

For optimal performance, avoid sharp bends and excessive tension on the cable and maintain separation from strong electromagnetic sources. Use this short CAT6A patch cable for intra-rack or adjacent-port connections where a compact, high-speed link is required.