Verkkokytkin Cudy GS1006P hallitsematon Gigabit Ethernet 6-porttinen PoE, 12 Gbit/s, 2048 MAC, musta

Description: 4-GbE PoE Switch with 2 GbE Uplink Ports Rack-mountable 6-GbE PoE switch with a 65W power supply and quiet cooling system. 4 Gigabit PoE ports + 2 Gigabit Ethernet ports Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x standards Ethernet ports support auto-negotiation for 10/100/1000 Mb/s Flow control method: IEEE 802.3x standard for full duplex, Back Pressure standard for half duplex Supports auto MDI/MDIX Watchdog support, enabled by default Store-and-forward switching mechanism All ports support link speed switching Zero-configuration function, automatic data forwarding to adaptive devices Panel indicators monitor operational status and assist in error analysis Three-button smart selection switch with three speeds, supporting VLAN, default, and extended modes Surge protection: common mode 4 kV; ESD: air 8 kV, contact 6 kV (level B) | Switch class: Unmanaged | Application: Home and small office | Network architecture: GigabitEthernet | Number of 10/100 Mbps ports: None | Number of 10/100/1000 Mbps ports: None | 10/100/1000/2500 Mbps ports: None | Number of 10Gb ports: None | Number of ports 25Gb: None | Number of PoE ports (PoE & PoE+): None | Number of PoE+ ports: 6 | Number of COMBO ports: None | Number of SFP ports: None | Number of SFP+ ports: None | Number of SFP56 ports: None | Number of QSFP+ ports: None | Console port: No | Forwarding mode: Store-and-forward | Throughput: 12 | Forwarding rate: 8.928 | Memory buffer: 1 | MAC address table size: 2048 | Support for Jumbo frames: Yes | Jumbo frame size: 9 | Supported protocols and standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3x IEEE802.3af (15.4 W) IEEE802.3at (30 W) | Chassis type: Rack | Environment requirements: Operating temperature: -10°C to 50°C Storage temperature: -40°C to 70°C Operating humidity: 10% to 90%, non-condensing Storage humidity: 5% to 95%, non-condensing | Accessories included: GS1006P Power cord Installation guide | Power supply: AC Input: 100-240 V, 50/60 Hz Device power: max. 5 W PoE power: max. 60 W Power adapter: 65 W | Weight: 610 | Data Act: Link