Verkkokytkin Trendnet TEG-S762 10G Ethernet 6 porttia 60 Gbit/s

The TRENDnet TEG-S762 10G Ethernet 6 Ports 60 Gbit/s is a compact unmanaged network switch designed for small office and advanced home network environments that require multi-gigabit connections over RJ-45 copper. It provides six 10G-capable RJ-45 ports that support 100/1000/10000BASE-T operation and a switching capacity of 60 Gbit/s. The switch maintains a MAC address table suitable for dynamic device environments and supports a set of IEEE Ethernet standards for compatibility with a wide range of network devices.

Advantages

The switch delivers consistent wired performance with six RJ-45 ports that accept standard copper Ethernet cables, enabling high-throughput links without fiber. Its 60 Gbit/s switching capacity supports simultaneous traffic across multiple ports. Support for IEEE standards including 802.3ab, 802.3an, 802.3az, 802.3bz and 802.3u ensures interoperability with existing 1G and 10G devices. The compact form factor and straightforward unmanaged operation reduce setup complexity.

Suitable for

• Small offices that require multi-gigabit wired connections for servers, workstations and NAS
• Advanced home networks with high-bandwidth streaming, backups and media servers
• Edge aggregation where several 1G/10G copper devices need to be connected to a core network
• Workflows that demand low-latency, high-throughput LAN connectivity

Key specifications

• Port type: RJ-45 10G Ethernet (supports 100/1000/10000BASE-T)
• Number of ports: 6
• Switching capacity: 60 Gbit/s
• MAC address table size: 16000 entries
• Supported networking standards: IEEE 802.3ab, IEEE 802.3an, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u
• Weight: 2.33 kg

How to use

Install the TRENDnet TEG-S762 on a stable surface or within a standard rack shelf using appropriate mounting hardware. Connect powered devices to the RJ-45 ports using Cat5e/Cat6/Cat6a or higher cables rated for multi-gigabit performance. The unmanaged switch operates automatically—plug connected devices and the switch will negotiate link speed and duplex based on cable and device capabilities. Use standard network addressing and your existing DHCP or static IP scheme for attached hosts; no additional configuration is required on the switch itself.

Recommendations

For optimal 10G performance, use Cat6a or better cabling for runs up to the recommended distances and ensure connected devices support 10GBASE-T. Place the switch in a ventilated area to maintain airflow and avoid stacking powered equipment directly on top. Regularly verify link speeds on connected devices to confirm negotiated rates and replace cables that do not meet multi-gigabit specifications.