Vesipumppu Einhell AQUINNA 18/28

The Einhell AQUINNA 18/28 cordless garden pump is a battery-powered pump from the Power X-Change family designed for moving water where no mains power is available. It delivers up to 2,800 litres per hour, reaches a maximum delivery height of 25 metres (2.5 bar) and can suck water from depths down to 6 metres. The compact pump weighs around 2.55 kg, features a central carrying handle, two metal threaded connections (G1) and is supplied without battery or charger.

Advantages

The pump offers two operating modes: BOOST for maximum output and ECO for extended battery runtime at lower delivery pressure. An integrated overload protection switches the unit off in case of motor overheating. A large water filler screw simplifies initial priming and a drainage screw on the underside allows complete emptying for frost protection. The battery compartment is covered to protect the inserted battery from splash water and dust, and fixing holes enable secure permanent mounting.

Suitable for

• Pumping and transferring garden water
• Filling and emptying rainwater tanks and barrels
• Irrigation of small to medium-sized beds and lawns
• Temporary water supply in areas without mains power

Key specifications

• Brand: EINHELL
• Model: AQUINNA 18/28 (MPN 4180440, EAN 4006825668711)
• Power source: 18 V Power X-Change battery (battery and charger not included)
• Max. flow rate: 2,800 l/h
• Max. delivery height: 25 m (max. delivery pressure 2.5 bar)
• Suction depth: up to 6 m
• Weight: approx. 2.55 kg
• Connections: two metal threaded connections, G1

How to use

Insert a compatible 18 V Power X-Change battery and ensure the battery cover is properly closed. For the first start, open the large water filler screw and prime the pump according to the instructions, then close the filler screw. Select ECO mode for longer runtime at reduced pressure or BOOST mode for maximum delivery. Connect inlet and outlet hoses to the metal threaded connections and secure the pump in place using the fixing holes if a permanent installation is required. After use, drain residual water via the drainage screw to protect the pump from frost and store it in a dry place.

Recommendations

Use only Einhell Power X-Change batteries and recommended chargers. Do not operate the pump dry for prolonged periods. Regularly check and clean the filter and connections to maintain performance.