Virtajohto ProXtend tyyppi K Tanska avoin pää 5 m

The PC-KOE-005W-M power cord is a 5 m ProXtend cable with a straight Type K male connector on one end and an open end on the other, designed for installation and customization. It uses H05VV-F construction with a PVC jacket, three cores of 32 conductors each, a core cross-section of 1 mm², rated for 250 V and 16 A. Type K plugs are primarily used in Denmark and Greenland.

Advantages

The Power Cord ProXtend Type K Denmark Open End 5m provides a flexible H05VV-F cable for easy routing and installation, a white PVC jacket for standard mechanical protection, and an open-end finish that allows direct connection to equipment or wiring during montage. The Type K straight male connector ensures compatibility with Danish power outlets and supports the cable's 250 V / 16 A rating.

Suitable for

• Custom wiring and on-site cable assembly
• Connecting appliances and equipment in Denmark and Greenland
• Temporary power setups where an open-end cable is required
• Installations requiring a 5 m mains lead with Type K plug

Key specifications

• Manufacturer part number (MPN): PC-KOE-005W-M
• EAN: 5714590008739
• Connector 1: Power plug type K (straight, male)
• Cable length: 5 m
• Cable type: H05VV-F, PVC jacket
• Cores: 3 cores, 32 conductors per core
• Core cross-section: 1 mm²
• Rated voltage: 250 V
• Rated current: 16 A
• Colour: White

How to use

Prepare the open end by stripping the outer jacket and individual conductors to the required length, then connect the cores to the target terminal block, appliance, or junction according to local wiring standards and safety regulations. Ensure correct phase, neutral and earth identification when terminating the three cores. Verify the integrity of connections and insulation before applying mains voltage.

Recommendations

Use this Type K open-end power cord for installations in regions using Danish Type K sockets. Do not exceed the specified 16 A current and 250 V voltage ratings. For permanent or critical installations, have connections performed or inspected by a qualified electrician and follow local electrical codes.