Virtajohto Tecline 35018, 1 m, IEC 320 - C19-liitin, 250 V 16 A

Tecline 35018 is a 1 m power cable designed to connect equipment with a matching IEC inlet to devices using a C19 coupler. The cable supports mains voltages up to 250 V and currents up to 16 A, offering a short, reliable connection for rack-mounted equipment, UPS units, power distribution units and other professional electronics. Its compact length helps reduce cable clutter in data centers, server rooms and technical workspaces while ensuring a high-current supply where required.

Advantages

The cable provides a robust electrical connection rated for 250 V and 16 A, suitable for high-current devices. Its 1 m length balances flexibility and tidiness, minimising excess cable while allowing straightforward routing inside racks or cabinets. The IEC 320 plug and C19 coupler are widely used in professional power systems, ensuring compatibility with many servers, UPS systems and PDUs. The construction is intended for regular use in technical environments and for repeated insertion and removal.

Suitable for

• Server power connections in racks and enclosures
• Connecting UPS outputs to critical equipment
• Powering power distribution units (PDUs) and rack-mounted devices
• Professional electronics and test bench setups requiring a 16 A feed

Key specifications

• Cable length: 1 m
• Input connector type: IEC 320 (plug)
• Output connector type: C19 coupler
• Rated voltage: 250 V
• Rated current: 16 A
• Intended use: mains power for professional equipment and rack systems

How to use

Inspect connectors and cable for visible damage before use. Insert the IEC 320 plug into the matching mains outlet or PDU socket and attach the C19 coupler to the equipment inlet until it is fully seated. Ensure both ends are securely connected and that the cable is routed to avoid sharp bends, pinch points and contact with hot surfaces. Disconnect by pulling the connector bodies—do not pull the cable jacket. Use the cable only within its rated voltage and current limits.

Recommendations

Best practice is to use this 1 m cable for short runs inside racks or between adjacent cabinets to reduce cable slack. Avoid running the cable near sources of electromagnetic interference where sensitive signals are present, and periodically check connections for corrosion or looseness. For installations requiring longer reach, select a cable with appropriate length and the same voltage/current ratings.