Virtakaapeli Omnitronic kylmälaite 3×1,0 mm², 1,2 m

Omnitronic mains power cable Kaltgeräte 3x1.0 mm², 1.2 m length is a flexible power lead intended for connecting audio, DJ and AV equipment equipped with standard IEC (Kaltgeräte) inlets. The cable features three insulated conductors with a 1.0 mm² cross-section and a molded IEC connector on each end, providing a compact 1.2 m reach suitable for stage, studio and home setups where reliable mains connection and easy routing are required.

Advantages

The cable delivers stable power transmission thanks to three 1.0 mm² conductors and secure molded Kaltgeräte connectors that reduce contact resistance and the risk of accidental disconnection. Its 1.2 m length balances flexibility and manageability, making it simple to position equipment without excess cable clutter. Insulation and connector construction are designed for frequent handling common in live and studio environments.

Suitable for

Key specifications

How to use

Ensure the device and mains are switched off before connecting. Insert the IEC (Kaltgeräte) connector firmly into the equipment inlet until it seats fully. Connect the opposite end to a suitable mains socket or distribution unit. Route the cable to avoid sharp bends, high-traffic areas or contact with hot surfaces. After use, disconnect from mains by pulling the connector body rather than the cable to avoid strain on the conductors.

Recommendations

Use this Omnitronic Kaltgeräte cable for short to medium connections where flexibility and secure IEC connections are required. Inspect the cable and connectors periodically for wear, and replace the cable if insulation or connector integrity is compromised. Avoid overloading devices beyond their rated mains current and follow local electrical safety regulations when installing or operating equipment.