Virtakaapeli ShiverPeaks BS60016 2,5 m IEC C20 IEC C19

The ShiverPeaks BS60016 power cable is a 2.5 meter mains lead with IEC C20 to IEC C19 connectors designed for devices requiring up to 16 A of input current. Its length gives added reach for racks, servers, power distribution units (PDUs) and other high-performance equipment while maintaining a reliable electrical connection. The cable construction focuses on steady power delivery and installation flexibility for data centers, server rooms, studio racks and industrial environments.

Advantages

This power cable combines a robust connector pairing with a moderate 2.5 m length to simplify routing and connection in equipment racks. The IEC C20 and IEC C19 terminations provide a snug fit with compatible power inlets, reducing the risk of loose contacts. Rated for 16 A, the cable supports devices with higher current demands while the overall design prioritizes dependable, continuous power feed.

Key specifications

• Cable length: 2.5 meters
• Connector A: IEC C20
• Connector B: IEC C19
• Rated current: 16 A
• Intended use: mains power connection for high-current devices

How to use

Connect the IEC C20 end to the power outlet or PDU with a compatible C20 inlet and insert the IEC C19 end into the equipment power inlet. Ensure both connectors are fully seated to maintain a secure electrical connection. Route the cable to avoid sharp bends, pinching or heat sources and check that the connected devices do not exceed the 16 A rating. Inspect the cable periodically for wear or damage and replace it if any insulation or connector degradation is found.

Recommendations

Use this cable in environments where a stable, high-current mains connection is required. Avoid exposure to liquids and excessive mechanical stress. For installations in racks or tight spaces, secure the cable with appropriate clips or ties and confirm that the total current draw on the supply circuit remains within safe limits.