XFP-lähetin-vastaanotinmoduuli BlueOptics TOM-10G-SR1-A 10000 Mbit/s 1310 nm

The BlueOptics TOM-10G-SR1-A XFP transceiver module supports 10 Gbit/s data transfer over fiber and operates at a central wavelength of 1310 nm. Designed for use in fiber optic networks, this compact module provides a hot-pluggable interface compatible with XFP ports and is intended for short- to medium-range links where 10 Gbit/s throughput and stable optical performance are required.

Advantages

The module offers a standardized XFP interface and a maximum data transfer rate of 10000 Mbit/s, enabling integration with a wide range of networking devices. Its optical wavelength specification and compact form factor provide predictable link characteristics and simplified installation. The transceiver is suitable for environments where consistent 10 Gbit/s connectivity and straightforward replacement or upgrade of optical interfaces are needed.

Suitable for

• 10 Gbit/s fiber optic uplinks and aggregation links
• Data center and server room interconnects over multimode or single-mode fiber as applicable
• Enterprise backbone connections and campus network links
• Network equipment that accepts XFP pluggable modules

Key specifications

• Interface type: XFP hot-pluggable transceiver
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical wavelength: 1310 nm
• Form factor: XFP module compatible with standard XFP slots
• Application: Fiber optic links for short to medium distances depending on fiber type and system design

How to use

Install the XFP module into an XFP-compatible port on the network device while the device is powered down or follow the vendor’s hot-plug instructions where supported. Ensure the fiber cabling and connectors match the transceiver’s optical type and polish. After insertion, verify link status through the host device management interface and confirm that the interface operates at the intended 10 Gbit/s data rate. Replace or reseat the module following standard electrostatic discharge (ESD) precautions and manufacturer guidance.

Recommendations

Choose appropriate fiber type, patch cords, and transceiver settings to match expected link distance and loss budget. Maintain clean connectors and use dust caps when the module is not in service to preserve optical performance.